Reference Guide

exec Enter the keyword exec to send accounting information
when a user has logged in to EXEC mode.
commands
level
Enter the keyword command followed by a privilege level for
accounting of commands executed at that privilege level.
name | default Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods is used.
start-stop Enter the keywords start-stop to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at
the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting. Dell Networking OS currently only supports
TACACS+ accounting.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
In the example above, TACACS+ accounting is used to track all usage of EXEC
command and commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for
example, use the aaa accounting command 1 command.
Example
Dell(conf)# aaa accounting exec default start-stop tacacs+
Dell(conf)# aaa accounting command 15 default start-stop tacacs
+
Dell(config)#
Related
Commands
enable password – changes the password for the enable command.
login authentication – enables AAA login authentication on the terminal lines.
password – creates a password.
tacacs-server host – specifies a TACACS+ server host.
1194
Security