Reference Guide

tSysLog
0x41d27000 350400 35040 10000 0.00% 0.00% 0.00% 0
tExcTask
!-------------------output truncated ---------------------!
Related
Commands
show hardware layer2 acl – displays Layer 2 ACL data for the selected stack
member and stack member port-pipe.
show hardware layer3 – displays Layer 3 ACL or QoS data for the selected stack
member and stack member port-pipe.
show hardware stack-unit – displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
show hardware system-flow – displays Layer 3 ACL or QoS data for the selected
stack member and stack member port-pipe.
show interfaces stack-unit – displays information on all interfaces on a specific
S5000 stack member.
show processes memory – displays CPU usage information based on processes
running in an S5000 switch.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
S5000
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control
processor’s SWPQ statistics.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Field Description
Tx Process Source Service Identifier
Rx Process Destination Service Identifier
Cur Len Current number of messages enqueued
High Mark Highest number of packets in the queue at any point of time
Control and Monitoring
119