Reference Guide

Parameters
controlEntry
integer
Enter the keyword controlEntry to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON Statistic Table. The
integer value must be a unique in the RMON statistic table.
owner name (OPTIONAL) Enter the keyword owner followed by the
owner name to record the owner of the RMON group of
statistics.
Defaults none
Command
Modes
CONFIGURATION INTERFACE (config-if)
Command
History
Version 9.0(1.3) Introduced on the S5000.
rmon event
Add an event in the RMON event table.
S5000
Syntax
rmon event number [log] [trap community] [description string]
[owner name]
To disable RMON on an interface, use the no rmon event number [log]
[trap community] [description string] command.
Parameters
number Assign an event number in integer format from 1 to 65535.
The number value must be unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON
log entry. The log entry is triggered and sets the eventType in
the RMON MIB to log or log-and-trap. The default is No log.
trap
community
(OPTIONAL) Enter the keyword trap followed by an SNMP
community string to configure the eventType setting in the
RMON MIB. This sets either snmp-trap or log-and-trap. The
default is
public.
description
string
(OPTIONAL) Enter the keyword description followed by a
string describing the event.
owner name (OPTIONAL) Enter the keyword owner followed by the name
of the owner of this event.
Defaults As noted above.
1172
Remote Monitoring (RMON)