Reference Guide

ip split-horizon
Enable split-horizon for RIP data on the interface. As described in RFC 2453, the split-horizon scheme
prevents any routes learned over a specific interface to be sent back out that interface.
S5000
Syntax
ip split-horizon
To disable split-horizon, use the no ip split-horizon command.
Defaults Enabled
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ip poison-reverse – sets the prefix for RIP routing updates.
maximum-paths
Set RIP to forward packets over multiple paths.
S5000
Syntax
maximum-paths number
To return to the default values, use the no maximum-paths commands.
Parameters
number Enter the number of paths. The range is 1 to 16. The default
is 4 paths.
Defaults 4
Command
Modes
ROUTER RIP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
RIP supports a maximum of 16 ECMP paths.
Routing Information Protocol (RIP)
1157