Reference Guide

Usage
Information
This command triggers updates of the main RIP routing tables.
debug ip rip
Examine RIP routing information for troubleshooting.
S5000
Syntax
debug ip rip [database | [events [interface-type slot/port] |
packet [interface-type slot/port]] | trigger]
To turn off debugging output, use the no debug ip rip command.
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type and ID as one of the
following:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
NOTE: This option is available on the S5000 as a sub-
option.
database (OPTIONAL) Enter the keyword database to display
messages when there is a change to the RIP database.
events (OPTIONAL) Enter the keyword events to debug only RIP
protocol changes.
trigger (OPTIONAL) Enter the keyword trigger to debug only RIP
trigger extensions.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
1150
Routing Information Protocol (RIP)