Reference Guide

47
Routing Information Protocol (RIP)
Routing information protocol (RIP) is a distance vector routing protocol. The Dell Networking OS
supports both RIP version 1 (RIPv1) and RIP version 2 (RIPv2) on the S5000.
NOTE: For more information about configuring RIP, refer to the Dell Networking OS Configuration
Guide
.
auto-summary
Restore the default behavior of automatic summarization of subnet routes into network routes. This
command applies only to RIP version 2.
S5000
Syntax
auto-summary
To send sub-prefix routing information, use the no auto-summary command.
Defaults Enabled.
Command
Modes
ROUTER RIP
Command
History
Version 9.0(1.3) Introduced on the S5000.
clear ip rip
Update all the RIP routes in the Dell Networking OS routing table.
S5000
Syntax
clear ip rip
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Routing Information Protocol (RIP)
1149