Reference Guide

Parameters
interface
interface
(OPTIONAL) Enter the keyword interface followed by the
ID of the specific interface for which to display PVLAN status.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command has two types of display — a list of all PVLAN interfaces or for a
specific interface. Examples of both types of output are shown below.
The following describes output from the show interfaces private-vlan
command shown in the Examples below.
Field Description
Interface Displays the type of interface and associated slot and port
number.
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface
resides.
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
Example (All)
Dell# show interfaces private-vlan
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Te 2/1 10 Primary Promiscuous Up
Te 2/2 100 Isolated Host Down
Te 2/3 10 Primary Trunk Up
Te 2/4 101 Community Host Up
Example
(Specific)
Dell# show interfaces private-vlan Te 2/2
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Te 2/2 100 Isolated Host Up
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated,
or primary.
show vlan private-vlan – displays the PVLANs and/or interfaces that are part of a
PVLAN.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
Private VLAN (PVLAN)
1143