Reference Guide

show debugging
View a list of all enabled debugging processes.
S5000
Syntax
show debugging
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show debug
Generic IP:
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
TenGigabitEthernet 4/0-3,5-6,10-11,20
TenGigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
TenGigabitEthernet 5/0,2,4,6,8,10,12,14,16
Dell#
show environment
View S5000 system component status (for example, temperature or voltage).
S5000
Syntax
show environment [all | fan | stack-unit unit-number | pem]
Parameters
all Enter the keyword all to view all components.
fan Enter the keyword fan to view only information on fans. The
output of this command is chassis dependent.
stack-unit unit-
number
Enter the keyword stack-unit followed by a number to
view only information on a stack-unit. The range is from 0 to
11.
pem Enter the keyword pem to view only information on power
entry modules.
Command
Modes
• EXEC
• EXEC Privildge
Control and Monitoring
113