Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
service-class dot1p-mapping – Identifies the class map.
show qos policy-map
View the QoS policy map information.
S5000
Syntax
show qos policy-map {summary [interface] | detail [interface]}
Parameters
summary
interface
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and
slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
detail interface To view a policy map interface in detail, enter the keyword
detail and optionally one of the following keywords and
slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example (IPv4)
Dell#show qos policy-map detail tengigabitethernet 0/0
Interface TenGigabitEthernet 4/1
Policy-map-input policy
1126
Quality of Service (QoS)