Reference Guide

Usage
Information
After the IP DSCP bit is set, other QoS services can then operate on the bit settings.
show qos class-map
View the current class map information.
S5000
Syntax
show qos class-map [class-name]
Parameters
class-name (Optional) Enter the name of a configured class map.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show qos class-map
Class-map match-any CM
Match ip access-group ACL
Related
Commands
class-map – identifies the class map.
show qos dot1p-queue-mapping
Displays the dot1p priority to queue mapping on the switch.
S5000
Syntax
show qos dot1p-queue-mapping
Defaults
• dot1p Priority: 0 1 2 3 4 5 6 7
• Queue: 0 0 0 1 2 3 3 3
Command
Modes
EXEC Privilege
Quality of Service (QoS)
1125