Reference Guide

class-map
class-map-
name
(OPTIONAL) Enter the keyword class-map followed by the
class map name assigned to the queue in character format
(16 character maximum).
NOTE: This option is available under policy-map-
input
only.
qos-policy
qos-policy-
name
(OPTIONAL) Enter the keywords qos-policy followed by
the QoS policy name assigned to the queue in text format
(16 characters maximum). This specifies the input QoS policy
assigned to the queue under
policy-map-input and
output QoS policy under policy-map-output context.
Defaults none
Command
Modes
CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
There are eight four (4) queues per interface on the S5000. This command assigns
a class map or QoS policy to different queues.
Related
Commands
class-map – identifies the class map.
service-policy input – applies an input policy map to the selected interface.
service-policy output – applies an output policy map to the selected interface.
set
Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
S5000
Syntax
set {ip-dscp value | mac-dot1p value}
Parameters
ip-dscp value (OPTIONAL) Enter the keywords ip-dscp followed by the IP
DSCP value. The range is 0 to 63.
mac-dot1p
value
Enter the keywords mac-dot1p followed by the dot1p value.
On theS5000, the allowed values are: 0, 2, 4, 6.
Defaults none
Command
Modes
CONFIGURATION (conf-qos-policy-in)
Command
History
Version 9.0(1.3) Introduced on the S5000.
1124
Quality of Service (QoS)