Reference Guide

Usage
Information
rate-shape can be applied only as an aggregate policy. If it is applied as a class-
based policy, rate-shape does not take effect.
Related
Commands
rate shape – shapes traffic output as part of the designated policy.
qos-policy-output – creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S5000
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy
input policy-map-name [layer2]
command.
Parameters
policy-map-
name
Enter the name for the policy map in character format (16
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Defaults Layer 3
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can attach a single policy-map to one or more interfaces to specify the
service-policy for those interfaces. A policy map attached to an interface can be
modified.
NOTE: The service-policy commands are not allowed on a port channel.
The service-policy input policy-map-name command and the
service-class dynamic dot1p command are not allowed simultaneously
on an interface. However, the service-policy input command (without
the policy-map-name option) and the service-class dynamic dot1p
command are allowed on an interface.
Related
Commands
policy-map-input – creates an input policy map.
1122
Quality of Service (QoS)