Reference Guide

committed-
rate
Enter the bandwidth in Mbps. The range is 0 to 10000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is 16 to
200000. The default is 50.
peak peak-rate (OPTIONAL) Enter the keyword peak followed by a number
to specify the peak rate in Mbps. The range is 0 to 10000.
The default is the same as designated for committed-rate.
Defaults Burst size is 50 KB. peak-rate is by default the same as committed-rate.
Granularity for committed-rate and peak-rate is Mbps unless you use the kbps
option.
Command
Modes
QOS-POLICY-IN
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
rate police – specifies traffic policing on the selected interface.
qos-policy-input – creates a QoS output policy.
rate-shape
Shape traffic output as part of the designated policy.
S5000
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Specify a value after the keyword as a
multiple of 64.
rate Enter the outgoing rate in multiples of 10 Mbps. The range is
10 to 10000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is 0 to
10000. The default is 10.
Defaults Burst size is 10 KB. Granularity for rate is Mbps unless you use the kbps option.
Command
Modes
QOS-POLICY-OUT
Command
History
Version 9.0(1.3) Introduced on the S5000.
Quality of Service (QoS)
1121