Reference Guide

qos-policy-output
Create a QoS output policy.
S5000
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the no qos-policy-output qos-
policy-name command.
Parameters
qos-policy-
name
Enter your output QoS policy name in character format (32
characters maximum).
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to specify the name of the output QoS policy. After specifying
the output policy, you can define rate-limit and bandwidth-percentage. This
command enables Qos-Policy-Output Configuration mode—(conf-qos-policy-
out).
When changing a service-queue configuration in a QoS policy map, all QoS rules
are deleted and re-added automatically to ensure that the order of the rules is
maintained. As a result, the Matched Packets value shown in the show qos
statistics
command is reset.
Related
Commands
bandwidth-percentage – assigns weight to the class/queue percentage.
rate-police
Specify the policing functionality on incoming traffic.
S5000
Syntax
rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-
rate [burst-KB]]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Specify a value after the keyword as a
multiple of 64.
1120
Quality of Service (QoS)