Reference Guide

show cpu-traffic-stats
View the CPU traffic statistics.
S5000
Syntax
show cpu-traffic-stats [port number | all ]
Parameters
port number (OPTIONAL) Enter the port number to display traffic statistics
on that port only. Range: 1 to 1568.
all (OPTIONAL) Enter the keyword all to display traffic
statistics on all the interfaces receiving traffic, sorted based
on the traffic.
Defaults all
Command
Modes
EXEC
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most
traffic is displayed first. All CPU and port information is displayed unless a specific
port or CPU is specified. Traffic information is displayed for router ports only; not
for management interfaces. The traffic statistics are collected only after the debug
cpu-traffic-stats command is executed; not from the system bootup.
NOTE: After debugging is complete, use the no debug cpu-traffic-
stats
command to shut off traffic statistics collection.
Example
Dell#show cpu-traffic-stats
Processor : CP
--------------
Received 100% traffic on TenGigabitEthernet 7/12 Total
packets:304392
LLC:0, SNAP:0, IP:0, ARP:0, other:304392
Unicast:0, Multicast:304392, Broadcast:0
Dell#
Related
Commands
debug cpu-traffic-stats – enables CPU traffic statistics for debugging.
112
Control and Monitoring