Reference Guide

Related
Commands
service-queue – assigns a class map and QoS policy to different queues.
policy-aggregate – allows an aggregate method of configuring per-port QoS using
policy maps.
service-policy output – applies an output policy map to the selected interface.
qos-policy-input
Create a QoS input policy on the router.
S5000
Syntax
qos-policy-input qos-policy-name [layer2]
To remove an existing input QoS policy from the router, use the no qos-policy-
input
qos-policy-name [layer2] command.
Parameters
qos-policy-
name
Enter the name for the policy map in character format (32
characters maximum).
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is
Layer 3.
Defaults Layer 3
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to specify the name of the input QoS policy. After the input
policy is specified, rate-police can be defined. This command enables Qos-Policy-
Input Configuration mode— (conf-qos-policy-in).
When changing a Service-Queue configuration in a QoS policy map, all QoS rules
are deleted and re-added automatically to ensure that the order of the rules is
maintained. As a result, the Matched Packets value shown in the show qos
statistics command is reset.
Related
Commands
rate police – incoming traffic policing function.
Quality of Service (QoS)
1119