Reference Guide

Parameters
policy-map-
name
Enter the name of the policy map in character format (32
characters maximum).
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Defaults Layer 3
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The input policy map is used to classify incoming traffic to different flows using
class-map, QoS policy, or incoming packets DSCP. This command enables Policy-
Map-Input Configuration mode (conf-policy-map-in).
Related
Commands
service-queue – assigns a class map and QoS policy to different queues.
policy-aggregate – allows an aggregate method of configuring per-port QoS using
policy maps.
service-policy input – applies an input policy map to the selected interface.
policy-map-output
Create an output policy map.
S5000
Syntax
policy-map-output policy-map-name
To remove a policy map, use the no policy-map-output policy-map-name
command.
Parameters
policy-map-
name
Enter the name for the policy map in character format (16
characters maximum).
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The output policy map is used to assign traffic to different flows using QoS policy.
This command enables Policy-Map-Output Configuration mode (conf-policy-
map-out).
1118
Quality of Service (QoS)