Reference Guide

Usage

Information

You must enter the class-map command in order to access this command. After

the class map is identified, you can configure the match criteria.

The match ip precedence command and the match ip dscp command are

mutually exclusive.

Up to eight precedence values can be matched in one match statement. For

example, to indicate the IP precedence values 0 1 2 3, enter either the match ip

precedence 0-3

or match ip precedence 0,1,2,3 command.

NOTE: Only one of the IP precedence values must be a successful match

criterion, not all of the specified IP precedence values need to match.

Commands

class-map – identifies the class map.

match mac access-group

Configure a match criterion for a class map, based on the contents of the designated MAC ACL.

S5000

Syntax

match mac access-group {mac-acl-name}

Parameters

mac-acl-name Enter a MAC ACL name. Its contents is used as the match

criteria in the class map.

Defaults none

Command

Modes

CLASS-MAP

Command

History

Version 9.0(1.3) Introduced on the S5000.