Reference Guide

To remove the bandwidth percentage, use the no bandwidth-percentage
command.
Parameters
percentage Enter the percentage assignment of weight to the class/
queue. The range is 0 to 100% (granularity 1%).
Defaults none
Command
Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed
and disables the scheduling of that class. If the sum of the bandwidth percentages
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related
Commands
qos-policy-output – creates a QoS output policy.
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality of
service policies to each class.
S5000
Syntax
class-map {match-all | match-any} class-map-name [layer2]
Parameters
match-all Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-all to determine
that the packets must meet all the match criteria in order to
be considered a member of the class.
match-any Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-any to determine
that the packets must meet at least one of the match criteria
in order to be considered a member of the class.
class-map-
name
Enter a name of the class for the class map in a character
format (32 character maximum).
layer2 Enter the keyword layer2 to specify a Layer 2 Class Map.
The default is Layer 3.
Defaults Layer 3
1110
Quality of Service (QoS)