Reference Guide

Related
Commands
rate-police – specifies traffic policing on the selected interface.
rate shape
Shape the traffic output on the selected interface.
S5000
Syntax
rate shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Specify a value after the keyword as a
multiple of 64.
rate Enter the outgoing rate in multiples of 10 Mbps. The range is
10 to 10000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is 0 to
10000. The default is
10.
Defaults Granularity for rate is Mbps unless you use the kbps option.
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
rate-shape – shapes traffic output as part of the designated policy.
service-class dot1p-mapping
Configure a service-class criterion based on a dot1p value.
S5000
Syntax
service-class dot1p-mapping {dot1p0 value | dot1p1 value |
dot1p2 value | dot1p3 value | dot1p4 value| dot1p5 value |
dot1p6 value | dot1p7 value}
Parameters
dot1p0 value ...
dot1p7 value
Enter a dot1p list number and value. The list number range is
0 to 7. The range is 0 to 3.
1106
Quality of Service (QoS)