Reference Guide

Defaults 30 seconds
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
ipv6 pim neighbor-filter
Prevent the system from forming a PIM adjacency with a neighboring system.
S5000
Syntax
ipv6 pim neighbor-filter {access-list}
Parameters
access-list Enter the name of a standard access list. Maximum 16
characters.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Do not enter this command before creating the access-list.
ipv6 pim register-filter
Configure the source DR so that it does not send register packets to the RP for the specified sources and
groups.
S5000
Syntax
ipv6 pim register-filter access-list
Parameters
access-list Enter the name of the extended ACL that contains the
sources and groups to be filtered.
Defaults none
Command
Modes
CONFIGURATION
PIM-Sparse Mode (PIM-SM)
1073