Reference Guide

• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
hash-mask-
length
(OPTIONAL) Enter the hash mask length for RP selection.
The range is 0 to 128. The default is 126.
priority (OPTIONAL) Enter the priority value for Bootstrap election
process. The range is 0 to 255. The default is 0.
Defaults Refer to Parameters.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
ipv6 pim dr-priority
Change the designated router (DR) priority for the IPv6 interface.
S5000
Syntax
ipv6 pim dr-priority priority-value
To remove the DR priority value assigned, use the no ipv6 pim dr-priority
command.
Parameters
priority-value Enter a number. Preference is given to larger/higher number.
The range is 0 to 4294967294. The default is 1.
Defaults 1
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The router with the largest value assigned to an interface becomes the designated
router. If two interfaces contain the same designated router priority value, the
interface with the largest interface IP address becomes the designated router.
PIM-Sparse Mode (PIM-SM)
1071