Reference Guide

IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
clear ipv6 pim tib
Clear the IPv6 PIM multicast-routing database (tree information base—TIB).
S5000
Syntax
clear ipv6 pim tib [group-address]
Parameters
group-address (OPTIONAL) Enter the multicast group address in the
x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show ipv6 pim tib – displays the IPv6 PIM tree information base (TIB)
debug ipv6 pim
Invoke IPv6 PIM debugging.
S5000
Syntax
debug ipv6 pim [bsr | events | group group | packet | register
[group] | state | | timer [assert | hello | joinprune |
register]]
To disable IPv6 PIM debugging, use the no debug ipv6 pim command.
Parameters
bsr (OPTIONAL) Enter the keyword bsr to invoke debugging of
IPv6 PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword events to invoke debugging
of IPv6 PIM events.
1068
PIM-Sparse Mode (PIM-SM)