Reference Guide

Usage
Information
If there is a change in the configuration, Dell Networking OS prompts you to save
the new configuration. Or you can save your running configuration with the copy
running-config command.
Related
Commands
reset stack-unit – resets any designated stack member except the management
unit.
send
Send messages to one or all terminal line users.
S5000
Syntax
send [*] | [line ] | [console] | [vty]
Parameters
* Enter the asterisk character * to send a message to all tty
lines.
line Send a message to a specific line. Range: 0 to 11.
console Enter the keyword console to send a message to the
primary terminal line.
vty Enter the keyword vty to send a message to the virtual
terminal.
Defaults none
Command
Modes
EXEC
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Messages can contain an unlimited number of lines; however, each line is limited
to 255 characters. To move to the next line, use the <CR>. To send the message
use
CTR-Z;to abort a message use CTR-C.
service timestamps
Add time stamps to debug and log messages. This command adds either the uptime or the current time
and date.
S5000
Syntax
service timestamps [debug | log] [datetime [localtime] [msec]
[show-timezone] | uptime]
106
Control and Monitoring