Reference Guide

Parameters
seconds Enter a number as the number of seconds between router
query messages. The range: 0 to 65535. The default is 30
seconds.
Defaults 30 seconds
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
ip pim register-filter
Use this feature to prevent a PIM source DR from sending register packets to an RP for the specified
multicast source and group.
S5000
Syntax
ip pim register-filter access-list
To return to the default, use the no ip pim register-filter access-list
command.
Parameters
access-list Enter the name of an extended access list. Maximum 16
characters.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The access name is an extended IP access list that denies PIM register packets to
RP at the source DR based on the multicast and group addresses. Do not enter this
command before creating the access-list.
PIM-Sparse Mode (PIM-SM)
1051