Users Guide

show ip bgp ipv6 unicast peer-group
Allows you to view information on the BGP peers in a peer group.
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name (OPTIONAL) Enter the name of a peer group to view information about that peer
group only.
summary (OPTIONAL) Enter the keyword summary to view status information of the peers
in that peer group. The output is the same as that found in the show ip bgp
ipv6 unicast summary command.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp ipv6 unicast summary
Allows you to view the status of all BGP connections.
Syntax
show ip bgp ipv6 unicast summary
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
The following describes the show ip bgp ipv6 unicast summary command shown in the Example
below.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table
version
Displays the BGP table version and the main routing table version.
924 IPv6 Border Gateway Protocol (IPv6 BGP)