Users Guide

show ip bgp ipv6 unicast community-list
View routes that are affected by a specific community list.
Syntax
show ip bgp ipv6 unicast community-list community-list-name
Paramters
community-list-
name
Enter the name of a configured IP community list.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast dampened-paths
View BGP routes that are dampened (non-active).
Syntax
show ip bgp ipv6 unicast dampened-paths
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast detail
Display detailed BGP information.
Syntax
show ip bgp ipv6 unicast detail
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
918 IPv6 Border Gateway Protocol (IPv6 BGP)