Users Guide

ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x
format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap dampening
information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the flap statistics
on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members of a peer-
group.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format.
network-mask If you enter the network address, next enter the network mask, from 0 to 128.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
clear ip bgp ipv6 flap-statistics
Clear BGP flap statistics, which includes the number of flaps and the time of the last flap.
C-Series, E-Series, S4810
Syntax
clear ip bgp ipv6 unicast flap-statistics [network | filter-list list |
regexp regexp
904 IPv6 Border Gateway Protocol (IPv6 BGP)