Users Guide
ipv4-neighbor-
addr
|
ipv6-
neighbor-addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP route
information exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal
information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on
the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible
routes.
received-routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords received-routes then either the network
address (in dotted decimal format) or the network mask (in slash prefix format) to
view all information received from neighbors.
NOTE: You must configure the neighbor soft-reconfiguration
inbound command prior to viewing all the information received from the
neighbors.
denied-routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords denied-routes then either the network
address (in dotted decimal format) or the network mask (in slash prefix format) to
view all information on routes denied using neighbor inbound filters.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.1.0 Added support for IPv4 multicast and IPv6 unicast address families
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Added the detail option. Output now displays the default MED value.
Version 7.2.1.0 Added the received and denied route options.
Version 6.3.10 The output is changed to display the total number of advertised prefixes.
Usage
Information
The following describes the show ip bgp ipv6 unicast neighbors command shown in the
Example below.
Lines
Beginning
With
Description
BGP neighbor Displays the BGP neighbor address and its AS number. The last phrase in the line
indicates whether the link between the BGP router and its neighbor is an external
or internal one. If they are located in the same AS, then the link is internal;
otherwise, the link is external.
BGP version Displays the BGP version (always version 4) and the remote router ID.
IPv6 Border Gateway Protocol (IPv6 BGP) 893