Users Guide

Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6 unicast
summary command. The text line above the route table states the number of COMMUNITY attributes
found.
show ip bgp ipv6 unicast community-list
View routes that are affected by a specific community list.
Syntax
show ip bgp ipv6 unicast community-list community-list-name [exact-match]
Paramters
community-list-
name
Enter the name of a configured IP community list.
exact-match (OPTIONAL) Enter the keywords exact-match to display only for an exact match
of the communities.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast dampened-paths
View BGP routes that are dampened (non-active).
Syntax
show ip bgp ipv6 unicast dampened-paths
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
IPv6 Border Gateway Protocol (IPv6 BGP) 889