Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

861

862

863

864

865

866

867

868

869

870

Parameters

ipv6-address

Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

peer-group-name

Enter the name of the peer group to set the default route of all routers in that peer

group.

route-map

map-

name

(OPTIONAL) Enter the keywords route-map then the name of a configured route

map.

Defaults Not configured.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Usage

Information

If you apply a route map to a BGP peer or neighbor with the neighbor default-originate

command configured, the software does not apply the set filters in the route map to that BGP peer or

neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).

Syntax

neighbor {ipv6-address | peer-group-name} description text

To delete a description, use the no neighbor {ipv6-address | peer-group-name}

description text command.