Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

861

862

863

864

865

866

867

868

869

870

out (OPTIONAL) Enter the keyword out to view only outbound keepalive messages.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Usage

Information

Entering a no debug ip bgp command removes all configured debug commands for BGP.

debug ip bgp notifications

Allows you to view information about BGP notifications received from neighbors.

Syntax

debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in

| out]

To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-

name] notifications [in | out] command.

Parameters

ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length

in the /x format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

peer-group

peer-

group-name

(OPTIONAL) Enter the keywords peer-group then the name of the peer group.

in (OPTIONAL) Enter the keyword in to view BGP notifications received from

neighbors.

out (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors.