Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000
851852853854855856857858859860
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-
group-name
Enter the keywords peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only information on inbound BGP
routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound BGP
routes.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in
the debugging command. The in and out parameters cancel each other; for example, if you enter
debug ip bgp in and then enter debug ip bgp out, you do not see information on the incoming
routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
debug ip bgp events – views information about BGP events.
debug ip bgp keepalives – views information about BGP keepalives.
debug ip bgp notifications – views information about BGP notifications.
debug ip bgp updates – views information about BGP updates.
debug ip bgp events
Allows you to view information on local BGP state changes and other BGP events.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] events [in | out]
To disable debugging, use the no debug ip bgp ipv6-address | peer-group peer-group-
name] events command.
Parameters
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-
group-name
Enter the keywords peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only information on inbound BGP
routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound BGP
routes.
Command Modes EXEC Privilege
IPv6 Border Gateway Protocol (IPv6 BGP) 857