Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

851

852

853

854

855

856

857

858

859

860

Parameters

as-number

Enter an autonomous system (AS) number to reset neighbors belonging to that AS.

If used without a qualifier, the keyword resets all neighbors belonging to that AS.

The range is from 1 to 65535.

flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all flap statistics

belonging to that AS or a specified address family within that AS.

ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that address family.

ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that address family.

unicast (OPTIONAL) Enter the keyword unicast to select the unicast option within the

selected address family.

multicast (OPTIONAL) Enter the keyword multicast to select the multicast option within

the selected address family. Multicast is supported on IPv4 only.

soft (OPTIONAL) Enter the keyword soft to configure and activate policies without

resetting the BGP TCP session; that is, BGP Soft Reconfiguration.

NOTE: If you enter clear ip bgp ipv6-address soft, both inbound

and outbound policies are reset.

in (OPTIONAL) Enter the keyword in to activate only inbound policies.

out (OPTIONAL) Enter the keyword out to activate only outbound policies.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

clear ip bgp ipv6-address

Reset BGP sessions specific to an IPv6 address. The soft parameter (BGP Soft Reconfiguration) clears the policies without

resetting the TCP connection.

Syntax

clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast {flap-

statistics | soft {in | out}} | unicast {flap-statistics | soft {in | out}}

| ipv6 unicast {flap-statistics | soft {in | out}| soft [in | out]

Parameters

ipv6-address

Enter an IPv6 address to reset neighbors belonging to that IP. Used without a

qualifier, the keyword ipv6–address resets all neighbors belonging to that IP.