Users Guide

Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Related
Commands
capture bgp-pdu max-buffer-size – enables route reflection between the route reflector and the clients.
show capture bgp-pdu neighbor – configures a route reflector and clients.
capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the policies without
resetting the TCP connection.
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast soft [in |
out] | soft [in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
ipv4 multicast
soft [in | out]
(OPTIONAL) Enter the keywords ipv4 multicast soft [in | out] to set
options within the specified IPv4 address family.
ipv6 unicast soft
[in | out]
(OPTIONAL) Enter the keywords ipv6 multicast soft [in | out] to set
options within the specified IPv6 address family.
soft (OPTIONAL) Enter the keyword soft to configure and activate policies without
resetting the BGP TCP session, that is, BGP Soft Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address soft, both inbound
and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
clear ip bgp as-number
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the TCP connection.
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast {flap-statistics
| soft {in | out}} | unicast {flap-statistics | soft {in | out}} | ipv6
unicast {flap-statistics | soft {in | out}| soft [in | out]
852 IPv6 Border Gateway Protocol (IPv6 BGP)