Users Guide

Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Defaults Not configured.
Command Modes ROUTE-MAP
Command
History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
The set ipv6 next-hop command is the only way to set an IPv6 Next-Hop.
show config
View the current route map configuration.
C-Series, E-Series, S-Series
Syntax
show config
Command Modes ROUTE-MAP
Command
History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Example
Dell(config-route-map)#show config
!
route-map Rmap1 permit 10
match ip address v4plist
match ipv6 address plist1
match ipv6 next-hop prefix-list plist2
match ipv6 route-source prefix-list plist3
set next-hop 1.1.1.1
set ipv6 next-hop 3333:2222::
show route-map
View the current route map configurations.
C-Series, E-Series, S-Series
Syntax
show route-map
Command Modes
● EXEC
● EXEC Privilege
IPv6 Access Control Lists (IPv6 ACLs) 811