Users Guide

● For a Port Channel interface, enter the keywords port-channel followed by
a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series,
the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.2.1 Introduced on the S-Series.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series. Increased the name string to accept up to 140
characters. Prior to version 7.8.1.0, names are up to 16 characters long.
7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
Field Description
“Ingress IPv6...” Displays the name of the IPv6 ACL, in this Example “AclList1”.
“seq 10...” Displays the filter. If the keywords count or byte were configured in the filter,
the number of packets or bytes processed by the filter is displayed at the end of
the line.
Example
Dell#show ipv6 accounting access-list
!
Ingress IPv6 access list AclList1 on GigabitEthernet 9/0
Total cam count 15
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 101 count (0 packets)
!
Dell#
show running-config acl
Display the ACL running configuration.
C-Series, E-Series, S-Series
Syntax
show running-config acl
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
806 IPv6 Access Control Lists (IPv6 ACLs)