Users Guide

resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
S-Series
Syntax
resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum
Step-to-Increment}
Parameters
ipv4 | ipv6 | mac Enter the keyword ipv4, ipv6 or mac to identify the access list type to
resequence.
access-list-name Enter the name of a configured IP access list, up to 140 characters. Increased name
string to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16
characters long.
StartingSeqNum Enter the starting sequence number to resequence. The range is 0 to 4294967290.
Step-to-
Increment
Enter the step to increment the sequence number. The range is 1 to 4294967290.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
8.4.2.0 Introduced on the S-Series.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
When all sequence numbers have been exhausted, this feature permits re-assigning new sequence
number to entries of an existing access-list.
Related
Commands
resequence prefix-list ipv6 – resequences a prefix list.
resequence prefix-list ipv6
Re-assign sequence numbers to entries of an existing prefix list.
C-Series, E-Series, S-Series
Syntax
resequence prefix-list ipv6 {prefix-list-name StartingSeqNum Step-to-
increment}
Parameters
prefix-list-name Enter the name of configured prefix list, up to 140 characters. Increased the name
string to accept up to 140 characters. Prior to version 7.8.1.0, the names are up to
16 characters long.
800 IPv6 Access Control Lists (IPv6 ACLs)