Users Guide

Table 1. Output Fields for the show interfaces fibrechannel
Command (continued)
Field Description
Output bytes/sec, frames/sec, % of line-rate Outgoing rate of FC
traffic in bytes per
second, frames per
second, and percentage of
the total line rate
.
Time since last interface status change Elapsed time since the
operational status of the
interface last changed
.
Example
Dell#show interfaces fibreChannel 0/5
FibreChannel 0/5 is up, FC link is up
Pluggable media present, FC-SFP+ type is FC-8GBPS-SR
Wavelength is 850nm
SFP+ receive power reading is -2.9362dBm
Interface index is 35030024
MTU 2148 bytes
LineSpeed 8000 Mbit
Port type is F, Max BB Credits is 16
WWN is 20:05:5c:f9:dd:ef:0b:80, FC-ID is 010500
Last clearing of "show interface" counters 03:04:47
Statistics:
BBCR_FrameFailures 0 TotalRxBytes 1540
BBCR_RRDYFailures 0 TotalTxBytes 2072
Class2FramesIn 0 LongFramesIn 0
Class2FramesOut 0 LossOfSync 0
Class3FramesIn 13 ShortFramesIn 0
Class3FramesOut 14 RxLinkResets 0
Class3Discard 0 TxLinkResets 1
DecodeErrors 0 TotalLinkResets 1
FReject 0 TotalRxFrames 13
FBusy 0 TotalTxFrames 14
AddressErrors 0 RxOfflineSeq 1
LinkFailures 0 TxOfflineSeq 3
InvalidCRC 0 TotalOfflineSeq 4
Rate info:
Input 0 bytes/sec, 0 frames/sec, 0.00% of line-rate
Output 0 bytes/sec, 0 frames/sec, 0.00% of line-rate
Time since last interface status change: 03:00:35
Related
Commands
interface fibrechannel — configures a Fibre Channel interface on the switch.
speed
Set the speed of a Fibre Channel port or configure the port to auto-negotiate its speed with a peer.
S5000
Syntax
speed {auto | 2G | 4G | 8G}
Parameters
auto The port autosenses the speed of a peer FC port .
2G Port speed is 2 gigabits per second (Gbps).
4G Port speed is 4 Gbps.
8G Port speed is 8 Gbps.
718 Fibre Channel Interface Commands