Users Guide

Example
Dell#show fc topology
Local Port Info
_____________________
Port FC 0/1
Port WWN 20:01:5c:f9:dd:ef:24:40
Port Type E
Remote Link Information
_____________________
Port Type E
Domain Id 01
Port Name 20:03:5c:f9:dd:ef:1b:80
Node Name 10:00:5c:f9:dd:ef:1b:80
Dell#
show fc-trace-level
Display the currently configured FC trace level.
S5000
Syntax
show fc-trace-level
Parameters None
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the show fc-trace-level command to display the current trace level used to record FC
information in the FC trace file, where:
● 0: FC traces are turned off.
● 1: FC error messages are recorded.
● 2: FC warning messages are recorded.
● 3: FC informational messages are recorded.
● 4: All messages generated for FC operation on the switch are recorded.
To set the FC trace level, use the change fc-trace-level command.
Example
Dell#show fc-trace-level
FC Trace Level = 4 (All)
Dell#
Related
Commands
change fc-trace-level— changes the FC trace level used to record FC information in the trace log.
710 Fabric Services Commands