Users Guide

Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fc zone z1
Dell(conf-fc-zone-z1)#
Related
Commands
show fc zone — displays the configured zone.
show fcoe-map — displays the fabric parameters.
fc zoneset
Create a zoneset.
S5000
Syntax
fc zoneset zoneset_name
To delete a zoneset, use the no fc zoneset zoneset_name command.
Parameters
zoneset_name Enter the zoneset name.
Command Modes CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fc zoneset zs1
Dell(conf-fc-zoneset-zs1)#
Related
Commands
show fc zoneset — displays the configured and active zoneset.
show fcoe-map — displays the fabric parameters.
fcoe-map
Create an FCoE map which contains the parameters used to configure the links between server CNAs and a SAN fabric. Apply
the FCoE map on a server-facing Ethernet port.
S5000
Syntax
fcoe-map map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
Command Modes CONFIGURATION
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
An FCoE map is a template used to map FCoE and FC parameters in a converged fabric. An FCoE map is
used to virtualize upstream FC ports on an S5000 NPIV proxy gateway so that they appear to
downstream server CNA ports as FCoE forwarder (FCF) ports on an FCoE network. When applied to FC
702 Fabric Services Commands