Users Guide

Usage
Information
Use the clear counters fibrechannel command to clear the statistics (counters) displayed in
show interfaces fibrechannel command output for a specified FC port.
Example
Dell(conf)#clear counters fibrechannel 0/11
Clear counters on Fc 0/11 [confirm] yes
Related
Commands
interface fibrechannel — configures a Fibre Channel interface on the switch.
show interfaces fibrechannel — displays the configuration of a Fibre Channel interface.
create fc-dump-support
Perform a dump of information on S5000 Fibre Channel operation.
S5000
Syntax
create fc-dump-support
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to perform a dump of S5000 Fibre Channel operation and store the FC dump file in
flash:/CORE_DUMP_DIR. Syslog messages are generated at the start and end of the FC dump file
creation.
Example
Dell#create fc-dump-support
fc alias
Create a zone alias name.
S5000
Syntax
fc alias ZoneAliasName
To delete a zone alias name, use the no fc zone ZoneAliasName command.
Parameters
ZoneAliasName Enter the zone alias name.
Command Modes CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)#fc alias za1
Dell(conf-fc-alias-za1)#
Related
Commands
show fc alias — displays the configured alias.
700 Fabric Services Commands