Users Guide

Fabric Services Commands
The following commands are supported for Fabric Services operation on the S5000.
Topics:
• active-zoneset
• change fc-trace-level
• clear counters fibrechannel
• create fc-dump-support
• fc alias
• fc switch-mode fabric-services
• fc zone
• fc zoneset
• fcoe-map
• feature fc
• member — alias
• member — zone
• member — zoneset
• show fc alias
• show fc fabric
• show fc lsdb
• show fc ns
• show fc route
• show fc switch
• show fc topology
• show fc-trace-level
• show fc zone
• show fc zoneset
active-zoneset
Activate the zoneset.
S5000
Syntax
active-zoneset zoneset_name
To change to the default zone behavior, use the no active-zoneset zoneset_name command.
Parameters
zoneset_name Enter the zoneset name.
Command Modes FC FABRIC CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fcoe-map default_full_fabric
Dell(conf-fcoe-default_full_fabric)# fc-fabric
Dell(conf-fmap-default_full_fabric-fcfabric)# active-zoneset zs1
24
698 Fabric Services Commands