Users Guide

summary (OPTIONAL) Enter the keyword summary to view status information of the peers
in that peer group. The output is the same as that found in the show ip bgp
summary command.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Version 7.5.1.0 Added the detail option.
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp peer-group (multicast) – views information on the BGP peers in a peer group.
show ip bgp summary
Allows you to view the status of all BGP connections.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast summary
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Usage
Information
The following describes the sho ip bgp ipv4 multicast summary command shown in the
Example below.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table
version
Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries, route paths, and the amount of memory
used to process those entries.
BGP path
attribute entries
Displays the number of BGP path attributes and the amount of memory used to
process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed and the amount of
memory used to process them.
Border Gateway Protocol 439