Users Guide

show ip bgp inconsistent-as
View routes with inconsistent originating AS numbers; that is, prefixes that are announced from the same neighbor AS but with
a different AS-Path.
C-Series, S-Series
Syntax
show ip bgp ipv4 multicast inconsistent-as
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
show ip bgp ipv4 multicast neighbors
Allows you to view the information exchanged by BGP neighbors.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast neighbors [ip-address [advertised-routes |
dampened-routes | detail | flap-statistics | routes]]
Parameters
ip-address (OPTIONAL) Enter the IP address, in either IPv4 or IPv6 format, of the neighbor to
view only BGP information exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Display detailed neighbor information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on
the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible
routes.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Usage
Information
The following describes the show ip bgp ipv4 multicast neighbors command shown in the
Example below.
436 Border Gateway Protocol