Users Guide

redistribute ospf
Redistribute OSPF routes into BGP.
C-Series, E-Series TeraScale, S-Series
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match internal]]
[route-map map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf process-id command.
Parameters
process-id Enter the number of the OSPF process. The range is 1 to 65535.
match external {1
| 2}
(OPTIONAL) Enter the keywords match external to redistribute OSPF external
routes. You can specify 1 or 2 to redistribute those routes only.
match internal (OPTIONAL) Enter the keywords match internal to redistribute OSPF internal
routes only.
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name of a
configured route map.
Defaults Not configured.
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Usage
Information
When you enter the redistribute isis process-id command without any other parameters, Dell
Networking OS redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes.
This feature is not supported by an RFC.
This feature is not supported by an RFC.
show ip bgp ipv4 multicast
View the current MBGP routing table for the system.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast [detail | network [network-mask] [length]]
Parameters
detail (OPTIONAL) Enter the keyword detail to display BGP internal information for
the IPv4 Multicast address family.
network (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP
network to view information only on that network.
network-mask (OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network
address.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prefix.
430 Border Gateway Protocol