Users Guide

Defaults Disabled.
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
clear ip bgp ipv4 multicast
Reset MBGP sessions.
Syntax
clear ip bgp ipv4 multicast * ip-address [dampening | flap-statistics]
peer-group]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
ip-address Enter an IP address in dotted decimal format to clear the prefixes from that
neighbor.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap dampening
information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the flap statistics
on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members of a peer-
group.
Command Modes EXEC Privilege
Command
History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
clear ip bgp dampening
Clear information on route dampening.
Syntax
clear ip bgp dampening ipv4 multicast network network-mask
Parameters
dampening Enter the keyword dampening to clear route flap dampening information.
network (OPTIONAL) Enter the network address in dotted decimal format (A.B.C.D).
network-mask (OPTIONAL) Enter the network mask in slash prefix format (/x).
Command Modes EXEC Privilege
Command
History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
418 Border Gateway Protocol