Users Guide

Version Description
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp next-hop command shown in the following example.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has flapped.
Flaps Displays the number of times the next hop has flapped.
Example
Dell# show ip bgp next-hop
Next-hop Resolved
172.16.0.2 YES
Dell#
show ip bgp paths as-path
View all unique AS-PATHs in the BGP database.
Syntax
show ip bgp [vrf vrf-name] paths as-path
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp paths as-path command shown in the following example.
Field Description
Address Displays the internal address where the path attribute is stored.
Hash Displays the hash bucket where the path attribute is stored.
Refcount Displays the number of BGP routes using these AS-Paths.
AS-Path Displays the AS paths for this route, with the origin code for the route listed last.
Numbers listed between braces {} are AS_SET information.
Border Gateway Protocol 407