Users Guide

Version 9.4(0.0) Added support for VRF for the S4810, S4820T, and S6000.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp path command shown in the following example.
Field Description
Total Displays the total number of BGP path attributes.
Address Displays the internal address where the path attribute is stored.
Hash Displays the hash bucket where the path attribute is stored.
Refcount Displays the number of BGP routes using this path attribute.
Metric Displays the MED attribute for this path attribute.
Path Displays the AS path for the route, with the origin code for the route listed last.
Numbers listed between braces {} are AS_SET information.
Example
Dell#show ip bgp paths ?
community Display community information
extcommunity Display extended community information
regexp Display path information based on a regular
expression
| Pipe through a command
Dell#show ip bgp paths
Total 2 Paths
Refcount Metric Path
1 0 200 i
1 0 200 i
show ip bgp cluster-list
View BGP neighbors in a specific cluster.
S5000
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast]
cluster-list [cluster-id]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view cluster
information of BGP neighbors corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the keyword multicast to
view information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 multicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related to only to the ipv6 unicast routes.
Border Gateway Protocol 389