Users Guide

default Set the S5000 to boot up with the default boot parameters.
Default The S5000 boots up using the primary boot parameters if they are valid. If the primary parameters are not
valid, the switch boots with the secondary parameters. If the secondary parameters are not valid, it boots
with the default parameters.
Command
History
Version 9.0(1.3) Introduced on the S5000.
boot messages disable
Deactivate the NetBSD boot log. By default, the NetBSD log is disabled.
S5000
Syntax
boot messages disable
Command Modes BOOT USER
Command
History
Version 9.0(1.3) Introduced on the S5000.
boot messages enable
Enable the NetBSD boot log. By default, the NetBSD log is disabled.
S5000
Syntax
boot messages enable
Command Modes BOOT USER
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage Notes Dell recommends that the NetBSD log remain disabled on the S5000. Use the boot messages
enable command only if you need to debug S5000 operation.
boot show net config retries
Display the number of retries for a network boot configuration failure.
S5000
Syntax
boot show net config retries
Command Modes BOOT USER
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
BOOT_USER# boot show net config retries
Number of Network Boot Config Retries is : 0
172 Boot User Mode